Language: Français | English
 
Home > Products > Insulation > EnerSpan 30
EnerSpan® 30 Insulation

EnerSpan 30 Insulation


EnerSpan® 30 is a moulded expanded polystyrene (EPS) insulation with a
silver- gray colour manufactured to meet CAN/ULC-S701, Standard for
Thermal Insulation, Polystyrene, Boards and Pipe Covering. The insulation
boards are manufactured using Neopor® provided by BASF, a
graphite-enhanced raw material that reduces radiation heat transfer
resulting in higher thermal resistance (R-value) compared to standard
CAN/ULC-S701, Type 3 EPS insulation.

Continuous Insulation product contains:

• Exterior Insulation Sheathing
• Foundation Insulation
• Under Slab Insulation

Packaging:
Polywrapped in 24" high bundles 48" x 96" sheet size

NEOPOR® is a registered trademark of BASF SE.




The table below provides material properties for EnerSpan 30 insulation.

Material Properties Units CAN/ULC-S701 Type
1 2 3
Thermal Resistance
Minimum per 25mm (inch)
ASTM C518
m20C/W
(ft2•h•0F/BTU)
0.82
(4.7)
0.82
(4.7)
0.82
(4.7)
Compressive Resistance
Minimum @ 10% Deformation
ASTM D1621
kPa
(psi)
70
(30)
110
(16)
170
(25)
Flexural Strength
Minimum
ASTM C203
kPa
(psi)
170
(25)
240
(35)
300
(44)
Water Vapour Permeance
Maximum
ASTM E96
ng/(Pa.s.m2)
(Perms)
300
(5.2)
200
(3.5)
130
(2.25)
Water Absorption
Maximum
ASTM D2842
% By volume 6.0 4.0 2.0
Dimensional Stability
Maximum, 7 Days @ 70± 2℃ (158±40F)
ASTM D2126

% Linear Change 1.5 1.5 1.5
Limiting Oxygen Index
Minimum
ASTM D2863
% 24 24 24
Surface Burning Characteristics
Classification or Rating
CAN/ULC S102.2
Flame Spread 220
Smoke Developed Over 500