PlastiSpan® 25 Insulation
Increased R-value & compressive resistance

PlastiSpan 25 Insulation is a moulded expanded polystyrene (EPS)
insulation.It meets or exceeds the requirements of CAN/ULC-S701,Standard
for Thermal Insulation, Polystyrene, Boards and Pipe Covering. The closed
cell structure of PlastiSpan 25 insulation resists water absorption so it will
retain its R-value even in applications where severe temperature
differentials occur.
• Meets all building code requirements
• Meets CAN/ULC-S701, Type 3
• Long term thermal resistance - RSI 0.74/25 mm (R-value 4.27/inch)
• Closed cell insulation resists moisture
• CCMC 12426-L
Continuous insulation eliminates thermal bridging, increasing your total
effective RSI/R-value. This reduces energy costs and increases your
energy savings.
2x8 ft, 4x8 ft
2 ft high bundles
1, 1-1/2, 2, 2-1/2, 3 in.
CAN/ULC-S701-11, Standard for Thermal Insulation, Polystyrene,
Boards and Pipe Covering is the National Standard of Canada for moulded
expanded polystyrene (EPS) insulation. The table below provides material
properties for PlastiSpan 25 insulation meeting CAN/ULC-S701, Type 3.


PlastiSpan 25 Insulation is a moulded expanded polystyrene (EPS)
insulation.It meets or exceeds the requirements of CAN/ULC-S701,Standard
for Thermal Insulation, Polystyrene, Boards and Pipe Covering. The closed
cell structure of PlastiSpan 25 insulation resists water absorption so it will
retain its R-value even in applications where severe temperature
differentials occur.
• Meets all building code requirements
• Meets CAN/ULC-S701, Type 3
• Long term thermal resistance - RSI 0.74/25 mm (R-value 4.27/inch)
• Closed cell insulation resists moisture
• CCMC 12426-L
Continuous insulation eliminates thermal bridging, increasing your total
effective RSI/R-value. This reduces energy costs and increases your
energy savings.
2x8 ft, 4x8 ft
2 ft high bundles
1, 1-1/2, 2, 2-1/2, 3 in.
CAN/ULC-S701-11, Standard for Thermal Insulation, Polystyrene,
Boards and Pipe Covering is the National Standard of Canada for moulded
expanded polystyrene (EPS) insulation. The table below provides material
properties for PlastiSpan 25 insulation meeting CAN/ULC-S701, Type 3.
Applications using PlastiSpan
25

Product Information Bulletin
PIB 213 - PlastiSpan XD Insulation Material
Property Data Sheet CAN/ULC-S701-11,
Type 3
See more information on PlastiSpan 25
in our PIB section
Share this page:


Product Information Bulletin
PIB 213 - PlastiSpan XD Insulation Material
Property Data Sheet CAN/ULC-S701-11,
Type 3
See more information on PlastiSpan 25
in our PIB section
Share this page:









The table below provides material properties for PlastiSpan insulation meeting CAN/ULC-S701, Type 3.
Material Property | Test Method | Units | Property Values | |
Thermal
Resistance Minimum RSI per 25mm (R per inch) |
ASTM C518 |
m2 0C/W (ft2h0F/BTU) |
0.74 (4.27) |
|
Compressive
Resistance2 Minimum @ 10% Deformation |
ASTM D1621 |
kPa (psi) |
170 (25) |
|
Flexural Strength Minimum |
ASTM C203 |
kPa (psi) |
300 (44) |
|
Water
Vapour Permeance3 Maximum |
ASTM E96 |
ng/(Pa.s.m2) (Perms) |
130 (2.25) |
|
Water
Absorption4 Maximum |
ASTM D2842 |
% By volume | 2.0 | |
Dimensional Stability Maximum, 7 Days @ 70± 2℃ (158±40F) |
ASTM D2126 |
% Linear Change | 1.5 | |
Limiting Oxygen Index Minimum |
ASTM D2863 |
% | 24 |