Residential Solutions

Insulating Above a Slab

Recommended Products

Installation Instructions

1. Follow the Building Code

Be sure to follow the building code requirements applicable in your region.

2. Install a Moisture Barrier

Cover the entire floor area with a 6-mil polyethylene moisture barrier to eliminate moisture migration into your living area.

3. Attach Perimeter Nailers

Attach nailer with the same thickness as the insulation, around the perimeter, using self-tapping concrete screws penetrating the concrete floor as recommended by the screw manufacturer.

4. Install Nailers and Insulation

Cut the first row of insulation to a 21-3/4" width. Cut subsequent rows to 22-1/2" widths. Use the insulation cut as guides to place successive rows of nailers at 24" on centres. Install insulation with the green side facing up.

5. Prepare to Lay Sub-Floor

Mark the walls where the nailer centres intersect it to help locate the nailers when attaching the sub-floor. The sub-floor thickness should be 5/8". Snap chalk lines across the nailers to ensure the sub floor material is placed squarely.

6. Secure the Sub-Floor

Be sure to stagger the floor sheathing joints for extra stability. Apply adhesive to the nailers. Fasten the 5/8" floor sheathing directly to the nailers using either ringed nails or deck screws every 8". With an air nailer, use 2-inch ringed floor sheathing or screw nails. With a screw gun, use 1-1/2" or 1-3/4" deck screws.

7. Ready for Floor Finishing

Your basement floor is now correctly insulated and ready for your final decorating touch. You should notice the finished floor is now much more comfortable.

Technical
  • Plasti-Fab Design Manual 03 Floor Insulation Systems
  • PIB 249 - DuroFoam Insulation for Basement Applications
  • PIB 251 - DuroFoam Plus Insulation Used In Radiant Floor Heating Systems
  • PIB 275 - NBC 2010 - DuroFoam Insulation for Interior Basement Applications
  • PIB 284 - NBC 2010 - PlastiSpan Insulation for Interior Basement Applications
  • PIB 286 - PlastiSpan HD Insulation for Interior Basement Applications
  • PIB 317 - 2012 BCBC - PlastiSpan Insulation for Interior Basement Applications
  • PIB 329 - 2012 BCBC - PlastiSpan HD Insulation for Interior Basement Applications

Get In Touch

With such a wide range of applications, finding the right EPS solution for your project can raise specific questions. Fill out the form below and a Plasti-Fab representative will help you identify the best solution to meet your unique needs.