PlastiSpan 60 insulation is high compressive resistance foam ideal for use in applications where heavy loads are expected such as low temperature freezer floor or highway construction. With a compressive strength of 60 psi and an R-value of 4.3 per inch, PlastiSpan 60 provides the strength you need with Long-term thermal resistance with stays true for the life of the product.

PlastiSpan 60 insulation compressive resistance at 1% strain resists compressive creep under specified on the long term and exceeds CAN/ULC-S701.1, Type 3 requirements.

  • Available in 2x8 ft, 4x8 ft; 1 ft high bundles
  • 1, 1 ½, 2, 2 ½, 3 in. plus special order sizes and thicknesses to meet job sizes
  • Meets all building code requirements
  • Thermal resistance - RSI 0.75/25 mm (R-value 4.30/inch)
  • Closed cell insulation resists moisture
  • Easy to cut and install
  • Maintains R-value
  • 60 psi compressive resistance
  • No thermal drift
  • Less than 2% water absorption

Material Properties of PlastiSpan® 60 Insulation

Material Property Test Method Units Property Values
Compressive Resistance
Minimum @ 10% Deformation
ASTM
D1621
kPa
(psi)
140
(60)
Compressive Modulus
Minimum @ 10% Deformation
ASTM
D1621
kPa
(psi)
18000
(2610)
Thermal Resistance
Minimum RSI per 25mm (R per inch)
ASTM
C518
m20C/W
(ft2•h•0F/BTU)
0.75
(4.3)
Flexural Strength
Minimum
ASTM
C203
kPa
(psi)
517
(4.3)
Water Vapour Permeance
Maximum
ASTM
E96
ng/(Pa.s.m2)
(Perms)
207
(30)
Water Absorption
Maximum
ASTM
C272
% By Volume 2.0
Water Absorption
Maximum
ASTM
D2842
% By Volume 2.0
Dimensional Stability
Maximum, 7 Days @ 70± 2℃ (158±40F)
ASTM
D2126
% Linear Change 1.5
Oxygen Index
Minimum
D2863 volume % 24

Next Steps


Talk to a Rep

Talk to an EPS Product Specialist in your area who will help you with products and pricing.


Connect with Us

Send us your questions and one of our EPS experts will get back with you.